Got Questions? Call us at 480-470-5500. M-F 9AM to 4PM Arizona Time

KIT145 - Jeep Wrangler JK - 1 Ton Steering Kit - Steel

Do You Need a Flip Kit? (Pick One)
Would you like to include JAM nut wrenches?+ $40.00

Please note:  Steel connecting rods are not designed for rock crawling. If you hit them heavily on a rock, they will likely bend and are therefore NOT WARRANTIED against impact damage. If you intend to rock crawl, please consider our aluminum connecting rod options.

 

Check out our blog post on steel vs aluminum.

apexchassis.com\/collections\/apex-jeep-sale\/products\/kit145-jeep-wrangler-jk-1-ton-steering-kit-steel

Be sure to check vehicle fitment below

This is a complete "1 Ton" upgraded replacement steering kit for your 2007-2018 Jeep Wrangler JK. It includes the tie rod (DOM Steel) which is also the adjusting sleeve, and left & right forged steel tie rod ends, the drag link (DOM Steel ) which is also the adjusting sleeve, and left & right forged steel drag link ends. Plus 4 Ninja Lock Washers.

Depending on the options you choose above, it can be sent as an under knuckle mount (standard) or over knuckle mount (flip kit). All Flip Kits include the taper sleeve!!

Note: taper sleeves require the knuckle drag link mount to be drilled through with a straight 7/8" drill bit.

It does not include the steering stabilizer bracket which you will need to choose in the options above based on the steering stabilizer you use.

Stabilizer Relocation:
XP107 - Jeep JK Steering Stabilizer Relocation Kit
XP300 - Stabilizer Relocation Bolt at Trackbar

FITMENT:

Wheels and Spacers:If you run AEV or stock Rubicon wheels, you'll need a 1.5" spacer. This kits works with a 17" wheel with a 4.75" backspacing or less. We recommend the steering stabilizer be fitted in the stock location, or a relocation kit may be required.

Differentials & Mods:This steering system fits stock Dana 30/44 axles. If you have done any major modifications give us a ring at 480-470-5500 or email us at sales@apexchassis.com to discuss. This will fit most modifications, but we want to make sure before shipping. You may also want to discuss with your local Jeep shop to make sure all your modifications are compatible.

If your jeep has been upgraded to a Dana 60 axle, we have modifications that can work with that as well, just contact us to order.

The Special Sauce:

HOUSING
  • SAE 1045 Solid Steel Forged Housing: This is unequivocally the best carbon alloy steel for this application.
  • CNC Machined Housing: Make our parts and bearings dimensionally perfect, eliminating any die wear issues.
  • Knurled Housings: The preferred design for aftermarket installations.
BALL STUDS
  • SAE 4140 hot forged Chromoly Ball Studs: For the strongest possible metallurgy.
  • Induction Heat Treated Ball Studs: Provides a very precise heat treatment to the exact depth and location we want it.
  • Polished Ball Studs: Are built like an anti-friction bearing with extremely precise tolerances.
  • Rolled Threads: Are made by pressing the shape of the threads into the ball stud instead of cutting. This strengthens the threads instead of weakening them and allows for easy movement of hardware. This ain't no Ikea furniture!
  • Step Threads : allows for very easy movement of hardware on install and superior holding when torqued (installer choice).
BEARING DESIGN
  • Rugged Metal to Metal Bearing
BOOTS
  • CR Rubber Boots:The most durable material for undercar applications. Resistant to deterioration from road level ozone, oil/gas/engine fluids and extreme heat or cold.
  • Accordion Boot: Ideal for high-articulation components, more flexibility means longer life.
HARDWARE
  • Grade 8 - Class 10.9 Hardware: Superior tensile strength.
  • Castle Nut: Industry standard where high vibration loads occur.
ADJUSTING RODS
  • E-Coat Finish: Durable e-coat treatment
  • 1.5" DOM SAE 1020 Tube: Heavy walled steel tubing provides the tightest most robust steering on the market.
LUBRICATION
  • Pre threaded Zerk Housing: If you have ever installed a MOOG Ball Joint without a pre-threaded zerk fitting you will understand what a simple but great feature this is. Another installer fav.
  • Greaseable: Because it should be.
  • Pre-Greased: Just in case you forget, we have you covered.
  • Gull Winged Grease Grooves : Allows for improved lubrication disbursement around the ball stud.
  • Zerk Fittings : Included for every application.
SPECIAL FEATURES
  • Ninja Washers (tm): An APEX exclusive is our Ninja Washer which is a unique method of securing the lock nut to the tube, erasing the need for lightly built adjusting tubes with ugly pinch clamps. And who doesn't want a ninja on their front end.

Installation Instructions

Customer Reviews

Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
M
Mike Jag (Pine Bluff, US)
Great Steering Upgrade

I purchased this kit for our 2013 jeep JKU. We have had to replace the factory steering setup twice in the last 4 years do to worn components. The jeep has a 3 inch lift and 35x12.5x20 tires on 20x10 wheels. It really only does light wheeling and lots of road travel. This is my wife's daily so it sees lots of pot holes and quick maneuvers trying to avoid the other poor drivers on the road. "you know who you are!!" The install was super easy and the instructions actually made sense. I was amazed!! Not only did the instructions come in the kit but Apex emailed them to me as well. I couldn't believe the customer service I was getting. It was almost like I was buying something from a real company. I can not say enough how impressed I am with the way this company does business. I will 1000% be buying more products from them and spreading the word on how excellent there products are. Thank you for the great experience.

M
MICAH TEUTSCH (Ooltewah, US)
Good So Far!

Steering kit cane in well packaged and protected, Included clear consise instructions. Install went easy as far as the new parts, very easy to adjust.

L
Lang McGowan (Lakeville, US)
Excellent

excellent assistance, customer service, product and turn around. thank you!

S
S.H. (Varnville, US)
EXCELLENT CUSTOMER SERVICE !

I drive a Right Hand Drive Wrangler on the mail route. We purchased this tie rod kit. I do not remember the young lady's name that we dealt with but she was VERY helpful. She was professional and knowledgeable. My job requires me to have a vehicle for the mail route and with her help and fast shipping I was able to get back to work. I will be recommending APEX to the other mail carriers that I know.

j
jason whitt (Chesterfield, US)
Much heavier than stock

Fixed the death wobble I was having. I just wish it would have had a note saying it doesn’t work with 16” wheels. Now when I make a moderate to steep turn the tie rod ends rub my wheels. It was time for new tires I guess I’ll get new rims also to solve that issue

Customer Reviews

Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
M
Mike Jag (Pine Bluff, US)
Great Steering Upgrade

I purchased this kit for our 2013 jeep JKU. We have had to replace the factory steering setup twice in the last 4 years do to worn components. The jeep has a 3 inch lift and 35x12.5x20 tires on 20x10 wheels. It really only does light wheeling and lots of road travel. This is my wife's daily so it sees lots of pot holes and quick maneuvers trying to avoid the other poor drivers on the road. "you know who you are!!" The install was super easy and the instructions actually made sense. I was amazed!! Not only did the instructions come in the kit but Apex emailed them to me as well. I couldn't believe the customer service I was getting. It was almost like I was buying something from a real company. I can not say enough how impressed I am with the way this company does business. I will 1000% be buying more products from them and spreading the word on how excellent there products are. Thank you for the great experience.

M
MICAH TEUTSCH (Ooltewah, US)
Good So Far!

Steering kit cane in well packaged and protected, Included clear consise instructions. Install went easy as far as the new parts, very easy to adjust.

L
Lang McGowan (Lakeville, US)
Excellent

excellent assistance, customer service, product and turn around. thank you!

S
S.H. (Varnville, US)
EXCELLENT CUSTOMER SERVICE !

I drive a Right Hand Drive Wrangler on the mail route. We purchased this tie rod kit. I do not remember the young lady's name that we dealt with but she was VERY helpful. She was professional and knowledgeable. My job requires me to have a vehicle for the mail route and with her help and fast shipping I was able to get back to work. I will be recommending APEX to the other mail carriers that I know.

j
jason whitt (Chesterfield, US)
Much heavier than stock

Fixed the death wobble I was having. I just wish it would have had a note saying it doesn’t work with 16” wheels. Now when I make a moderate to steep turn the tie rod ends rub my wheels. It was time for new tires I guess I’ll get new rims also to solve that issue

Search