Welcome to our Apex Chassis Web Store!

KIT155 - Jeep Wrangler JK - 1 Ton Steering Kit - POL Aluminum

Do You Need A Flip Kit? (Pick One) Typically YES for Lifts 3.5" or More, Otherwise Select NO
Would you like to include JAM nut wrenches?+ $40.00

Inventory Status

Hey guys, our Wrangler JK Steering Kits in Steel, Black Anodized and Polished Aluminum steering kits are in stock, and ready for immediate shipping!!

apexchassis.com\/collections\/front-page-chev-and-2-5t\/products\/kit155-jeep-wrangler-jk-1-ton-steering-kit-pol-aluminum

Be sure to check vehicle fitment below

This is a complete "1 Ton" upgraded replacement steering kit for your 2007-2018 Jeep Wrangler JK. It includes the tie rod (polished aluminum) which is also the adjusting sleeve, and left & right forged steel tie rod ends, the drag link (polished aluminum) which is also the adjusting sleeve, and left & right forged steel drag link ends. Plus 4 Ninja Lock Washers.

Depending on the options you choose above, it can be sent as an under knuckle mount (standard) or over knuckle mount (flip kit). All Flip Kits include the taper sleeve!!

Note: taper sleeves require the knuckle drag link mount to be drilled through with a straight 7/8" drill bit.

It does not include the steering stabilizer bracket which you will need to choose in the options above based on the steering stabilizer you use.

FITMENT:

Wheels and Spacers:If you run AEV or stock Rubicon wheels, you'll need a 1.5" spacer. This kits works with a 17" wheel with a 4.75" backspacing or less. We recommend the steering stabilizer be fitted in the stock location, or a relocation kit may be required.

Differentials & Mods:This steering system fits stock Dana 30/44 axles. If you have done any major modifications give us a ring at 480-470-5500 or email us at sales@apexchassis.com to discuss. This will fit most modifications, but we want to make sure before shipping. You may also want to discuss with your local Jeep shop to make sure all your modifications are compatible.

If your jeep has been upgraded to a Dana 60 axle, we have modifications that can work with that as well, just contact us to order.

The Special Sauce:

HOUSING
  • SAE 1045 Solid Steel Forged Housing: This is unequivocally the best carbon alloy steel for this application.
  • CNC Machined Housing: Make our parts and bearings dimensionally perfect, eliminating any die wear issues.
  • Knurled Housings: The preferred design for aftermarket installations.
BALL STUDS
  • SAE 4140 hot forged Chromoly Ball Studs: For the strongest possible metallurgy.
  • Induction Heat Treated Ball Studs: Provides a very precise heat treatment to the exact depth and location we want it.
  • Polished Ball Studs: Are built like an anti-friction bearing with extremely precise tolerances.
  • Rolled Threads: Are made by pressing the shape of the threads into the ball stud instead of cutting. This strengthens the threads instead of weakening them and allows for easy movement of hardware. This ain't no Ikea furniture!
  • Step Threads : allows for very easy movement of hardware on install and superior holding when torqued (installer choice).
BEARING DESIGN
  • Rugged Metal to Metal Bearing
BOOTS
  • CR Rubber Boots:The most durable material for undercar applications. Resistant to deterioration from road level ozone, oil/gas/engine fluids and extreme heat or cold.
  • Accordion Boot: Ideal for high-articulation components, more flexibility means longer life.
HARDWARE
  • Grade 8 - Class 10.9 Hardware: Superior tensile strength.
  • Castle Nut: Industry standard where high vibration loads occur.
ADJUSTING RODS
  • Clear Polished Finish: Highly polished, beautiful aluminum.
  • 1.5" 7075-T6 Aluminum Rod: The best aluminum available for this application. Extremely durable but has some flex and memory if you really bash it into something.
LUBRICATION
  • Pre threaded Zerk Housing: If you have ever installed a MOOG Ball Joint without a pre-threaded zerk fitting you will understand what a simple but great feature this is. Another installer fav.
  • Greaseable: Because it should be.
  • Pre-Greased: Just in case you forget, we have you covered.
  • Gull Winged Grease Grooves : Allows for improved lubrication disbursement around the ball stud.
  • Zerk Fittings : Included for every application.
SPECIAL FEATURES
  • Ninja Washers (tm): An APEX exclusive is our Ninja Washer which is a unique method of securing the lock nut to the tube, erasing the need for lightly built adjusting tubes with ugly pinch clamps. And who doesn't want a ninja on their front end.

Installation Instructions

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
H
Hector Larralde (San Antonio, US)
Great service.

Great service and ease of doing business.

J
Josh Borkowski (Benton Harbor, US)
Quality Product

Love it looks amazing and is not hard to intall at all definitely can feel the difference with running 35s

J
Jeff Martin (Leeds, US)
It’s the best

I first saw this at jeep beach week in Daytona.
It took me almost a year to purchase.
My 2012 Jeep now drives like a new one.
Wished I had bought it sooner !

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
H
Hector Larralde (San Antonio, US)
Great service.

Great service and ease of doing business.

J
Josh Borkowski (Benton Harbor, US)
Quality Product

Love it looks amazing and is not hard to intall at all definitely can feel the difference with running 35s

J
Jeff Martin (Leeds, US)
It’s the best

I first saw this at jeep beach week in Daytona.
It took me almost a year to purchase.
My 2012 Jeep now drives like a new one.
Wished I had bought it sooner !

Search