KIT145 - Jeep Wrangler JK - 1 Ton Steering Kit - Steel2

Do You Need a Flip Kit? (Pick One)

Inventory Status

Hey guys, our Wrangler JK Steering Kits in Steel, Black Anodized and Polished Aluminum steering kits are currently in stock and shipping daily. Quantities are running low, order yours today!

apexchassis.com\/products\/kit145-jeep-wrangler-jk-1-ton-steering-kit-steel

Be sure to check vehicle fitment below

This is a complete "1 Ton" upgraded replacement steering kit for your 2007-2018 Jeep Wrangler JK. It includes the tie rod (DOM Steel) which is also the adjusting sleeve, and left & right forged steel tie rod ends, the drag link (DOM Steel ) which is also the adjusting sleeve, and left & right forged steel drag link ends. Plus 4 Ninja Lock Washers.

Depending on the options you choose above, it can be sent as an under knuckle mount (standard) or over knuckle mount (flip kit). All Flip Kits include the taper sleeve!!

It does not include the steering stabilizer bracket which you will need to choose in the options above based on the steering stabilizer you use.

FITMENT:

Wheels and Spacers: If you run AEV or stock Rubicon wheels, you'll need a 1.5" spacer. This kits works with a 17" wheel with a 4.75" backspacing or less. We recommend the steering stabilizer be fitted in the stock location, or a relocation kit may be required. 

Differentials & Mods:This steering system fits stock Dana 30/44 axles. If you have done any major modifications give us a ring at 480-470-5500 or email us at sales@apexchassis.com to discuss. This will fit most modifications, but we want to make sure before shipping.  You may also want to discuss with your local Jeep shop to make sure all your modifications are compatible.

If your jeep has been upgraded to a Dana 60 axle, we have modifications that can work with that as well, just contact us to order.

The Special Sauce:

Where It Fits:

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
j
jason whitt (Chesterfield, US)
Much heavier than stock

Fixed the death wobble I was having. I just wish it would have had a note saying it doesn’t work with 16” wheels. Now when I make a moderate to steep turn the tie rod ends rub my wheels. It was time for new tires I guess I’ll get new rims also to solve that issue

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
j
jason whitt (Chesterfield, US)
Much heavier than stock

Fixed the death wobble I was having. I just wish it would have had a note saying it doesn’t work with 16” wheels. Now when I make a moderate to steep turn the tie rod ends rub my wheels. It was time for new tires I guess I’ll get new rims also to solve that issue

Search