FORD - DODGE - CHEVY - JEEP STEERING - IN STOCK

DC106 - Falcon Stabilizer Clamp, Zinc, 2 Inch ID

apexchassis.com\/products\/dc106-damper-clamp-falcom-stabilizer-2

Be sure to check vehicle fitment below

This fits our 2 Inch Tie Rods - with the proper bolt size for the Falcon stabilizers.

Zinc coated DOM steel.

Customer Reviews

Based on 2 reviews
0%
(0)
100%
(2)
0%
(0)
0%
(0)
0%
(0)
K
KansasSlim (Nevada, US)
Two things about the clamp, maybe three…

1. It would be nice if there were instructions about how to install the clamp. The thread locker on the clamp that comes with the Falcon Nexus is pretty stout.

2. The spacers that come for use between the clamp and where it mounts on the stabilizer could be explained a bit. Or, the clamp could be made with a neck like the original clamp has, but thats probably not possible with the type of material the clamp is made from, so perhaps not appplicable.

3. The biggest headache is the fact that the threads for the bolts are in the bottom half and not the top. Would be SO much easier to mount the clamp on the tie rod if the bolts installed from the bottom.

D
Don Stotts (Sandpoint, US)
Plenty strong

Would be nice for the spacer to be machined to fit a little closer to factory Falcon mounting.

Customer Reviews

Based on 2 reviews
0%
(0)
100%
(2)
0%
(0)
0%
(0)
0%
(0)
K
KansasSlim (Nevada, US)
Two things about the clamp, maybe three…

1. It would be nice if there were instructions about how to install the clamp. The thread locker on the clamp that comes with the Falcon Nexus is pretty stout.

2. The spacers that come for use between the clamp and where it mounts on the stabilizer could be explained a bit. Or, the clamp could be made with a neck like the original clamp has, but thats probably not possible with the type of material the clamp is made from, so perhaps not appplicable.

3. The biggest headache is the fact that the threads for the bolts are in the bottom half and not the top. Would be SO much easier to mount the clamp on the tie rod if the bolts installed from the bottom.

D
Don Stotts (Sandpoint, US)
Plenty strong

Would be nice for the spacer to be machined to fit a little closer to factory Falcon mounting.

Search